 Crosman Pellgunoil Net 1/4 FL.OZ (7.139 ml) ~ NEW! Blister Packed
PREVENTS RUSTING
PREVENTS SEALS FROM DRYING OUT
Made exclusively for use with high compression Co2
Crosman's special formulation can help improve performance.
Keeps your CO2 piercing mechanism AND CO2 AIRGUN SEALS/ 'O' RINGS operating like new.
NOT FOR USE IN BREAK BARREL OR PCP AIRGUNS!
The valves of air and CO2 guns need a small amount of lubricant. Crosman Pellgun Oil® is the proper lubricant for the job. A drop of Pellgun Oil on the end of a CO2 cylinder is sufficient to lubricate the seals that engage the neck of the cylinder. A drop of the oil on pivot points and O-ring seals will keep things working smoothly. When a CO2 gun is fired rapidly, the expanding gas cools the surrounding metal parts and the inside of the barrel. In humid conditions, this can even cause moisture to condense on these parts. I have examined far more CO2 guns with barrels rusted on the inside than I have pneumatic guns. I make it a practice to run a dry patch down the bore of my CO2 guns after they reach ambient temperature just in case moisture may be present. |
